08 11 - Reproduction, even in part prohibited. Printed in UK Modified: 22 August 2024 08 11 08 11 Chemical Injection Resin RECA P380 & P380SF RECA P380 polyester resin is designed for anchoring studs, rebar, etc to most masonry base materials whether solid or hollow. Designed as a fast curing high strength resin fixing anchor for low to medium loads plus ideal for fittings to be placed closer to edges and each other. ¤ Excellent for crack and gap filling, the resin can be used directly in solid base materials and in hollow substrates by using sleeves. ¤ The two parts are stored separately within the cartridge and mixed in the nozzle on application. ¤ Available in a styrene-free version which has a low odour, offering the advantage of being able to be used in confined areas where strong odour could cause problems. ¤ The styrene-free version is also available in 300ml cartridge which fits a standard skeleton gun. Art. No. Description Qty Carton Qty 0912 022 380 P380 410ml cartridge c/w nozzle 1 12 0912 021 380* P380 Styrene free 410ml cartridge c/w nozzle 1 10 0912 020 300* P300 Styrene free chubpac 300ml cartridge 1 12 0911 001 306 Spare nozzle 1 - 0891 410 913 Resin gun 1 - Technical and COSHH data available upon request Installation Guide: 1. Drill correct size hole. 2. Clean hole thoroughly. 3. Squeeze material out of gun until an even colour is achieved. 4. Apply to hole, working from the base out (half fill). 5. Insert fixture, rotating to fully coat the surface. 6. Once resin has cured, fixture may be attached and nut tightened. *CE mark applies
RkJQdWJsaXNoZXIy MTU4NDg0