01 19 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 19 01 19 All dimensions in mm unless otherwise stated. RECA Ultra + HSS TiAIN Countersink The triple cutting edged conical and countersink deburring tool is characterised by its new machining geometry. The extra-wide flute offers faster chip and heat transfer, increasing the service life of the tool. The TiAlN (titanium aluminium nitride) coating further increases the life of the countersunk surface. Advantages ¤ Faster countersinking thanks to variable relief grinding that facilitates much higher feed rates. ¤ Longer service life thanks to the narrow cutting wedge, that reduces abrasive wear. ¤ Extremely quiet running ensures an optimal, smooth countersinking result. ¤ TiAIN coating for a longer service life, higher cutting speed and chatter-free working. ¤ Universal use - for materials up to 1100 N/ mm², suitable for steel and stainless steel (blue/green colour rings). ¤ No movement in the drill chuck and optimal, positive-fit power transmission via TRICON shank ¤ Universal application in steel, cast iron, stainless steel, non-ferrous base metals, and light metals. RECA TT Countersink drill bit Equipped with a 4.0 mm diameter drill bit, a 9.4 mm diameter countersink and a depth stop, this piece enables precise pre-drilling and countersinking in one step with a clear view of the working surface. ¤ The drill bit and depth stop can be continuously adjusted. ¤ The supplied drill bit (DIN 338, 4.0 mm) can be changed without any great effort. No special drill bit is required. ¤ No burn marks appear in the wood thanks to the movable depth stop. Application ¤ The RECA TT countersink drill bit should be operated at approx. 1300 rpm. If necessary, lightly lubricate between plastic depth stop and aluminium height adjustment with acid-free penetrating oil containing PTFE (e.g. Arecal Tef Clear Art. No.: 0896 711 400). ¤ Degrease the RECA TT countersink drill bit before using it for the first time. The Allen key provided can be used to set the drilling and countersinking depth or replace the drill bit. ¤ The set screw for the depth stop should be tightened with care and not too tightly. Art. No. Ø Shaft Ø Length Suitable for 0617 910 063 6.3 5 45 M3 0617 910 083 8.3 6 50 M4 0617 910 104 10.4 6 50 M5 0617 910 124 12.4 8 56 M6 0617 910 165 16.5 10 60 M8 0617 910 205 20.5 10 63 M10 0617 910 250 25 10 67 M12 0617 910 310 31 12 71 M16 0617 910 006 6 piece set (Includes 6.3, 8.3, 10.4, 12.4, 16.5 & 20.5) Art. No. Drill Ø Overall Ø 0217 099 100 4 12.4
RkJQdWJsaXNoZXIy MTU4NDg0