Reproduction, even in part prohibited. Printed in UK Modified: 27 August 2024 14 09 14 09 All dimensions in millimetres unless otherwise stated RECA Torque Wrench A tool used to tighten nuts and bolts to a predetermined torque value. Allows fasteners to be tightened to the proper tension, helping avoid damage from over tightening or joints coming apart from under tightening. ¤ Ergonomic and comfortable 2-component handle with soft grip zone. ¤ Robust 30-tooth ratchet mechanism. ¤ Large viewing window with magnifying function for optimum reading. ¤ Dual scale with N/m and lbf/ft graduations for precise settings. ¤ For controlled clockwise and anti-clockwise tightening, Change application direction by pushing the drive square through ¤ Torque set quickly and reliably by turning handle ¤ Secure locking feature on handle ¤ Trigger accuracy: ±3% tolerance of set scale value ¤ Clearly audible and tactile torque trigger with close-gap release ¤ Square drive in line with DIN 3120–ISO 1174 with ball detent ¤ Individual serial number for clear identification of product ¤ Includes certificate in line with DIN EN ISO 6789 – based on national standards Advice: ¤ Release the load after every application by twisting the torque mechanism to the 0 position. ¤ The torque wrench must be inspected (calibrated) at specified intervals, as for every measuring tool. ¤ Calibration certificates are valid for a maximum of 12 months from the time of coissioning. If the tool is used often, this period should be reduced. A period should be specified after an assessment in line with DIN EN ISO 6789, section 5.3.2, after 5000 actuations. Art. No. Min/max torque range N/m Square Drive Length 0700 501 100 20 - 100 1/2 412 0700 501 200 40 - 200 1/2 500
RkJQdWJsaXNoZXIy MTU4NDg0