01 23 - Reproduction, even in part prohibited. Printed in UK Modified: 23 August 2024 01 23 01 23 All dimensions in mm unless otherwise stated. Tap Wrenches Art. No. Size Length Fits Square Fit Tap Type 0656 001 310 1 85 2.4 - 5.5 M3 - 10 1/8– 3/8 Short 0656 001 512 2 100 4.5 - 7.0 M5 - 12 7/32-1/2 Short 0656 002 310 10 250 2.4 - 5.5 M3 - 10 1/8 - 3/8 Long Art. No. Thread Drill Dia. Taper Second Plug 0640 002 004 M2 1.6 0640 003 005 0640 103 005 0640 203 005 M3 2.5 0640 004 007 0640 104 007 0640 204 007 M4 3.3 0640 005 008 0640 105 008 0640 205 008 M5 4.2 0640 006 010 0640 106 010 0640 206 010 M6 5.0 0640 008 013 0640 108 013 0640 208 013 M8 6.8 0640 010 015 0640 110 015 0640 210 015 M10 8.5 0640 012 018 0640 112 018 0640 212 018 M12 10.2 0640 114 020 M14 12.0 0640 016 020 0640 116 020 0640 216 020 M16 14.0 0640 020 025 0640 120 025 M20 17.5 Art. No. Size Length Sqr. DIN Sqr. ISO For tap For tap (whit) 0657 2 2 280 3.8 - 7.0 4.0 - 9.0 M4 - 12 3/16-1/2 0657 3 3 375 4.9 - 12.0 4.9 - 12.0 M5 - 20 3/16-3/4 Hand Taps ISO 529 HSS Full range of metric hand taps to ISO 529, available as Taper, Second and Plug. ¤ Taper is ideal for through holes, and when starting a thread prior to using a Second or Plug; Second, the most commonly used tap, is ideal for through holes. ¤ Plug is mainly used to produce thread close to the bottom of the hole or in a hole that has already been partially threaded. ¤ For best results use RECA HSS drills for tapping holes - drill diameters are shown below. ¤ Tap wrenches and dies also available. ¤ Other sizes available POA. ¤ Standard pattern tap wrench for RECA and other brands of taps. ¤ T - Type ratchet tap wrench with forward / reverse operation and central lock option. ¤ Ideally suited for use in confined spaces.
RkJQdWJsaXNoZXIy MTU4NDg0